Ultimate Buying Guide to Select the Best Scuba Boots You Must Own


Extreme sports and hobbies are a thing nowadays. Most people are passionate about these things that give them the adrenaline rush they crave for. Some people may not understand how these sports and hobbies work for the physical and self-esteem needs of those engaged in them, but these definitely a way to boost their morale and confidence.

Ultimate Buying Guide to Select the Best Scuba Boots You Must Own 1

One of these sports for brave hearts is scuba diving. Who wouldn’t love to explore what’s beyond the blue-colored waves and horizons? The calmness of what awaits under these salty water forms will surprise you with all the things you’ll see for your own eyes.

So, if you’re into scuba diving, it is a must that you know the must-have gear and equipment. For wherever lies, the most beautiful creatures are various and, at times, risky environments.

Ocean waters found to be good for scuba diving tend to be cooler than any other part of the vast form of water. Primarily for the purpose of safety and protection, the best scuba boots will come in handy. A scuba diver has to put a checkmark for a pair of the best scuba diving shoes first on his list of most important gears to purchase.

A pair of scuba diving boots would surely benefit the diver as it protects the diver’s feet from unforeseen things under the water and the comparatively low temperature of the water.

The gear will not just protect your feet against the bottom of an ocean or sea, but also keep them safe in cold waters, where your feet can get very cold and uncomfortable, shortening the time of your dives. As you go deeper into the water, the temperature gradually drops, and this may be a bad thing if you do not have the proper diving shoes.

This way, you can be assured of having one of the best worry-less diving experiences. Dive boots may not be a priority if you prefer to dive in warm water. You may use full-foot fins, then. On the other hand, a cold-water scuba diver may use open heel fins, and it is a must to wear diving boots. In this case, neoprene dive socks are a great help.

The perfect pair of scuba boots will help you achieve a more effective and comfortable dive. You don’t have to think about having chaffed feet and enjoy a more exciting underwater experience.

In cold water, scuba boots can help you extend and enjoy your diving experience. wearing scuba boots underwater keep the divers’ feet warm and dry. Wetsuit boots or booties, on the other hand, are used by scuba divers and snorkelers for protection, warmth, and comfort.

The chaffing of fins and injury from sharp objects found beneath the ocean’s surface is inevitable making it very helpful to have these boots. Essential in cold water, scuba boots protect your body’s flashpoint.

This is one of the essentials to remember as your feet are very sensitive and your main heat might lose zones objects beneath the ocean’s surface. This gear may also have an adjustable strap to stabilize the fin on foot and is often worn with open- heel dive fins.

You need not use these dive boots if you use closed-heel fins. Other water sports like kayaking, sailing, and surfing also use this type of boots. There is no such thing as one-fits-all for scuba diving boots. They are available in a variety of types and styles.

Take note that when you purchase your diving shoes, you should do it with the fins like a set. What’s the deal? Well, as you are going to find out, there is an obvious difference between scuba diving boots and diving shoes, having slightly different characteristics.

Diving boots come with adjustable fins while diving shoes are paired with full foot fins. That is basically why you have to buy them at the same time. It’s either you buy the appropriate gears and come up with sound purchasing decisions.

There as primarily three things that you have to consider in choosing the right diving boots. First is the warmth that it provides your feet. Second, study the comfort that the boots will give your feet.

Uncomfortable protective gears result to uncomfortable diving experience. Lastly, one should consider its durability. Will your diving boots withstand your style of diving? Below is a comprehensive guide on how to choose the best pair of scuba boots to purchase. You may consider different factors.

In order for you to experience a memorable diving moment, here are some of the factors you can also consider in choosing the best scuba boots

Thickness

First up, think of how thick you want your dive boots. Keep in mind that dive boots, like a wetsuit, are made of neoprene, providing the same effects to your feet as the wetsuit does to the rest of your body. The thickness of most scuba boots ranges from 2mm to 7mm.

Practically speaking, a diver’s boots must be of the same thickness as that of the wetsuit. Your diving preference will help you decide on the thickness of your boots and wetsuit. If you prefer warm water diving, it is best to use a pair of high boots measuring 3mm high. It would surely be best to use in the Caribbean.

Warm water diving generally calls for thinner materials in boots. It could be as thin as 2mm. If you are a cold-water diver, gears with a thickness of more than 5mm would be just what you need. However, diving into extremely-cold-waters, use a thicker pair of boots. The material should be estimated to be close to 7mm thick. Your boots and wetsuit should be uniform in thickness.

Sole and Cut

Apparently, the type of sole for your diving boots depends on your diving preference and style. For shore diving, with an obvious presence of rocks and hot sand, it would be best to purchase a thick sole.

If you’re more of an ocean floor type of diver, thick soles for boots wouldn’t be a waste of money as there are plenty of sharp objects that can be found there. Thin soles will get easily get punctured in this type of environment. If visiting the ocean floor is not your thing, thinner soles will do. They are also called monster soles.

Thinner soles are also good for boat diving. It doesn’t matter if it’s high or low cut. The cut of the diving boots that you ought to purchase depends greatly on the water’s temperature you are diving into.

Warm-water divers must use low cut boots for extra mobility. However, a dive in colder waters requires higher-cut boots. High-cut boots give dryness of warmth instead of better mobility.

As far as your concern is the cut of your boots, mid-height is a good investment for warm-water diving. However, a pair of high boots is what you need to add warmth to your feet when cold water diving. Low-cut pull-on scuba booties and a pair of low-cut pull-on dive boots.

Higher cut boots are hard to put on. Manufacturers make them with zippers for ease in putting on and taking off. Thinner boots are sometimes a slipper-type of style. Zippers are of no use since you can just pull them on and off.

Size

To identify the correct size for your diving boots, consider your shoe size. If you are a half size, you may try rounding it up because scuba boots are only available on whole sizes. Opt for a bigger pair if, upon trying on, you find the boots too tight or too snug.

It’s better to have a little extra space than just enough for your feet. Purchasing diving boots is highly analogous to buying shoes. Your toes shoes are able to move freely inside the boots so as not to curl in the front part. Curling of the toes calls for a bigger diving boots size. Scuba boots are patterned in men’s sizes.

In getting the size for women, 1 or 2 should be subtracted from their shoe size. For example, a woman with a shoe size of 8 may opt to purchase a size 6 or 7 diving boots. And just like the shoes, a pair of diving shoes must not be too loose nor too tight as this may bring discomfort to anyone who wears them. Size up when you happen to notice that your toes curl up at the end of your boots.

Your diving preference will guide you in choosing the appropriate scuba diving boots to use. You’ll need diving boots that vary according to your point of entry when you’re about to do scuba diving. It’s different for those clambering over rocks from those walking in off a sandy beach and from those who are rolling back from a dive boat. Different considerations, different boots!

Construction

Neoprene, as a material for diving boots, is very stretchable. The downside is that it doesn’t provide much grip. The life of your dive boots may be prolonged by protecting the sole of the boots. It’s understood that all dive gears undergo a certain level of wear and tear.

Aside from being durable, it is safer to use non-neoprene materials on the sole of boots and socks. These materials provide a bit of roughness to the surface, making it slip-resistant. Slip-resistant boots are good to use both in and out of the water.

These may also serve as protection from sharp edges that a diver may walk into the water, even when you’re getting out of the water. The non-neoprene soles also keep a boat diver safe from silvers, broken glass and others that may pose hazards.

The drysuit boots repel water. Unlike the majority of scuba boots that do not keep your feet dry. Most scuba diving boots just trap the water that enters the boots and trap your body heat that eventually warms the water within the boots.

You are likely to have brought half the seawater with you when you get out of the water. Scuba boots usually have Neoprene polychloroprene as its material. It is a synthetic rubber material commonly used for wetsuits.

This material’s thickness ranges from 2 mm to 7 mm. Usually, low-top boots start below the ankle; high-top boots fully cover the diver’s ankle. Scuba boot’s soles also vary in thicknesses depending to the features and other textures for added traction. The boots may also have zippers, a hook-and-loop fasteners or even elastic tops to make it easier putting them on.

Protection

Beaches may differ in many ways, and entry points are not the same either. It is usually hot in soft sandy beaches, and many entry points for diving are rocky and covered with sharp shells. It is of great advantage to using scuba boots with rubber soles.

This will serve as the feet’s protection from burns, cuts, bite and stings. It also provides a greater grip on slip-prone surfaces. Carrying a 40-pound scuba gear on your back isn’t easy.

Added weight also makes it more painful to walk on sharp shells and rocks. Moreover, you may also experience falling on sharp rocks if you are not careful. It is more painful to endure injuries and damages to your very own diving equipment.

Check out the following for better input and guide to choosing what’s the best scuba diving boots for you.

  • 3 mm – Typically designed for scuba diving are the 3mm scuba boots. It also does wonder when used in freediving and spearfishing, especially if the water temperature ranges from 16°C to 24°C. The neoprene for this type of boots is glued first, then sewn for a more durable output and maximum strength. No net to worry because the needle used for sewing did not pass through the neoprene to prevent water from coming inside your boots. The heel, toe and instep are also crafted with rubber soles and reinforcements. These low-cut boots are generally comfortable and soft best paired with adjustable fins.
  • 3 to 7 mm – This type of diving boots got its soles and reinforcements real. These reinforcements can be found on the heel, toe, and instep. The benefit is that it gives you a good grasp and saves you the risk of falling or getting hurt. It is better to always consider your diving preference, water temperature and fin size when purchasing this type of boots.
  • 5 mm – The 5 mm scuba boots are crafted to be of best use in waters ranging from 10° C to 18°C in temperature. Much like the 3mm boots, this also is glued and sewn that guarantees a longer lifespan complete with rubber soles and reinforcements at its most intentional parts. It also has a side zip, which helps keep the warmth of your feet in your fins.
  • 6.5 mm – Diving in water between 10° C and 18°C, this is the most appropriate scuba boots. These are also glued and sewn, making it more durable yet free from water leakage. Reinforcements are also built in the heel part, toe part and instep.

Comfort

Anything that makes you feel uncomfortable greatly affects whatever you are into. This also goes with a diving boot. It is important that you go for comfort and not just how warm they are. If not, you’re going to regret it when getting into the depth of the sea.

If you feel that something is making you uncomfortable while still on land, it would surely make you feel more uncomfortable in the waters. Having to experience this all throughout the dive will eat the excitement for the activity. It will just give you stressed and numbed toes if your boots are too small.

The stressed seams of your boots will lead to wearing out; therefore, creating an opportunity for cold water to get into your boots. The damaged seams then will not be able to stop the water from coming in. as your dive progresses, your feet will feel colder because the stressed seams cannot stop the water from getting into your boots.

On the other hand, your body then will not be able to help warm it if water will not get trapped between your boots and your feet if the boots are too big.

The buckles and straps of your boots must also be treated with the utmost consideration. Movements done during the dive may cause them to rub against your heel, arch and other parts of the feet. This may result to the discomfort that results to chaffed skin, blisters or abrasions.

Wearing open-heel fins without dive boots, you’ll get to experience muscle cramps during the dive. you may also get chaffed skin. It is also beneficial for boots to have paddings. The different parts of your feet will be protected by them.

You may also opt for boots with coated or latex soles for greater grip and insulation. This provides greater resistance, comfort and protection against irritation.

Warmth

Proper insulation for the boots is something to take into account seriously. This is where the role of neoprene comes in. It keeps your body warm. Remember that dive boots are for keeping the feet, ankles, and toes warm for the entire dive.

Science explains that there is a reduction in the blood flow in the lower extremities when someone feels cold. This is the body’s reaction to conserve body heat. 2mm to 3mm boots are used for warm water diving. In colder water, you can use thicker boots that range from 5 mm to 7 mm. Foot and leg cramps are also avoided if your boots keep your feet warm and in good condition.

Diving boots with a Velcro strap or tab at the ankle or calf are noted to reduce the chance of water transfer in and out of the boots. This provides additional warmth to the feet. The fewer the seams, the lesser the chance of leakage.

Some boots with a zipper are easier to put on and take off. It is also better to use booties and socks for boots that have zippers. These booties cover the foot but not the ankle and calf made of neoprene. This is also possible to be worn with full-foot fins.

While the boots’ purpose is to keep the feet warm, dive socks prevent or reduce the wear and tear on the diver’s feet. Be careful not to get blisters and raw spots to avoid infections especially in warm waters. Booties may not be an additional burden for your gear bag as it provides more comfort for your diving.

  • Water Temperature
  • Water Between 10°C and 18°C

Appropriate shoes or boots are up to 6.5 mm of neoprene.

  • Water Between 16°C and 24°C

Choose shoes or boots with 2 – 5 mm of neoprene.

  • Water Over 25°C

Choose shoes or boots with 2 – 3 mm of neoprene.

Scuba Diving Boots’ Ace Over Scuba Diving Shoes

Aside from the type of fins that they go along with them, it is important to note that scuba diving boots are generally more durable than scuba diving shoes. Boots have rubber soles and reinforcements for the purpose of greater grip and protection, respectively.

Caring for Your Scuba Diving Boots

Any diver would want his high-end diving gear and equipment to last long. It is, therefore, a must that one knows how to take good care of them. Here are some ways to prolong the life of your boots.

  • Rinse after use. – It is important to rinse your diving boots in freshwater after a day’s dive. At most dive sites, operators have a rinse tank. Unrinsed neoprene gives off a nasty smell as the saltwater causes the material to lose its flexibility.
  • Soak for 15 minutes. – When you get home, soak your scuba booties approximately 15 minutes using a special wetsuit shampoo. You may use a shampoo for this purpose.
  • Inspect for damages. – It is best to keep your diving boots in good condition. But before you store them, check for rips and tears and fix them immediately. It will be more convenient to use the next time without worrying about its damages.
  • Store properly. – Remember, do not store your diving boots by folding or rumpling them after washing them. This may lead to losing its insulations. Proper safekeeping must be considered with utmost concern. Avoid exposing your boots to direct sunlight. Note never to store your boots in the garage.

Enjoying a great experience

Enjoying every diving experience can never go wrong if you know what to consider in purchasing your diving gear and equipment, most importantly choosing the best scuba diving boots. Purchasing a pair of diving boots is a good investment for a diver like you!

.

BeachAhoi

All things about beach lovers. What’s your type? Surf,Sea & Sun? Dive,Drink & Drunk? We provide tips and information to inspire you a better beach moment.

Recent Content