Learn Quicker about How to Penny Board (For All New Rider)

Penny boards are popular boards that really strike the interest and attention of all riders. Be it skateboarders or surfers; penny boards are worth investing with.

These boards were made having new riders in mind, so these boards were designed to ensure simplicity and safety upon use. But apart from all these, how to penny board is also an important thing to learn especially for beginners and new riders.

Proper Ways on How to Penny Board

Learn Quicker about How to Penny Board (For All New Rider) 1Penny boards are typically small plastic skateboards that are lightweight, flexible and suited for shorter distance rides or for maneuvering the streets.

Since these boards are shorter and lighter as compared to regular skateboards, you’ll learn to kick, to stand and maneuver on these types of boards.

If you wanted to learn quickly on how to penny board, keep the following in mind:

Standing on the Penny Board

The following are ways on how to penny board, especially when standing on the board:

  • Wear Only Proper Shoes

Flat-soled, close-toed shoes are the most ideal when riding penny boards. If you wanted to make sure that your toes are not exposed just in case you fall or trip, flat soles would let you grip and feel the entire board.

  • Position your Penny Board in Flat Surface

This step is very important especially if you have never really learned how to ride the skateboard. If you place your penny board on a flat surface, then it will pave the way for added control especially when standing and stop the board from sliding around.

If you stand in a patch of grass or of gravel, the surface tends to hold you steadily while learning how to stand on the board. You better hold something for proper balance. In case you’re close to the wall or handrail, hold into it to assist you in maintaining balance.

  • Put Your Right or Left Foot on the Penny Board

Put your foot behind the two screws connecting your front trucks into your penny board. It’s the foot that you will not use to kick and will be in front of your other foot always for balance. Note that your body needs to face forward.

  • Put Your Other Foot’s Ball on the Ground

You need to position this as if you’re going to kick. You also need to be practicing to pick this foot down and up while you are finding balance in the penny board using your other foot.

Balancing in your penny board using one foot is also an important part of the process. This will give you the feel of how easy and convenient your penny board wobbles. If you know far you can really lean prior to losing your own balance, then this helps a lot when you’re turning and ridging.

Just in case you feel that your penny board is wobbling too much, you better keep your trucks tighten. Trucks are metal parts of the board connecting the deck and the wheels.

Make use of unit tools, especially designed and crafted for the skateboards, and for adjusting the trucks. With such a tool, you will be able to reach and feel the right tightness.

  • Your Front Foot Should Be Adjusted

Your front foot should be moved around in the penny board until such time that you feel completely comfortable. If you have a complicated time to balance, consider putting your foot close to the middle while kicking the other.

Your main foot must be shifted using the heel and ball of your foot. Do this until such time that your entire foot presses down on the penny board. Ensure that your foot is correctly positioned so the front part of your shoe covers the bottom 2 screws in front.

  • Switch into Coasting Position

Your front foot must be turned at a 45-degree angle into the penny board. Position your back foot behind a back truck at least in a 90-degree angle to the board’s edge. The back foot is perpendicular to the penny board.

Put your foot in the spot where the lip curve meets the board’s flat body. When turning and shifting your foot on the front, you better be lifting up your heels and turning on the ball of your foot.

Kicking on the Penny Board

  • You Need to Move Your Board to Long Stretch of Concrete or Asphalt

Ensure that you are practicing in an area with no traffic since you got less control when you initially begin riding. It would be best to locate a quiet and empty place where you can practice. Also, look for a place where you can have some room for pushing a few times. Ensure that the place you’re skating does not have large bumps, rocks and cracks.

  • Face Forward

Position your front foot on the penny board behind front screws and discover your balance. Your other foot must be lifted off the ground and move your foot forward until such time you become comfortable and confident.

  • Make Sure That Both Of Your Feet Are Faced Straight Forward

You can accomplish this by kicking off from your foot’s ball that is in contact with one slight step. Avoid going too fast so soon. Most of your weight should be kept on the foot and leg that is on the board. You need to concentrate your weight in the front toe, and your knee should be slightly bent.

  • Kick through Placing the Ball of Your Foot into the Ground and Push Every Few Feet to Gain Speed Effectively

Never allow your foot to be touching the ground for a longer span of time or you might end up losing your balance. With your foot that kicks, push the ball of your feet off as if you are kicking dust in a backward manner. Create long strides when you’re pushing. A smooth and long stride can keep you consistent and can make balancing a lot easier.

  • Begin Coasting

When you’ve increased enough speed, and you feel great and comfortable, place your back foot on the penny board. Now, turn your body and feet sideways, curving your neck to be able to see where you’re going. Your front foot ought to be at around a 45-degree edge and back foot must be perpendicular to the penny board.

If you have to alter your front foot, slide this forward or in reverse utilizing your foot. Position your back foot exactly on the spot where the board’s lip meets the body, the spot where 4 back screws can be found.

You have to keep your knees slightly bent. Your gravity must be centered in the middle of the penny board then extend your arms. This helps a lot in maintaining proper balance.

  • More Practice is Needed to Move Between Positions

Transitioning between coasting and pushing until you feel confident and comfortable with your balance is crucial. Make sure to practice extensively prior to trying the penny board in busier locations. Go on and play around with your feet placements and bend in your knees. Create minor adjustments until the tome that your coasting stance tends to feel more natural.

  • Experiment with your Front Foot Placements

Your front foot must be in a 45 and 90-degree angle to the penny board in the course of your coasting. You’ll be facing sideways then. You need to pick an angle that provides you with ultimate terrain control. As you start, you may find that it feels comfortable if you will be keeping your front foot almost straight.

It is highly imperative to find the right and comfortable front foot placement because this can be responsible for steering your penny board and keep this well-situated underneath you.

Maneuvering the Penny Board

Follow these steps in maneuvering your penny board:

  • You Need to Have a Feeling and Idea on Your Turning Capacity

You need to have a clear idea of your capacity to turn while you have tighter trucks. If you are still in the process of practicing your coasting and kicking on the penny board, it’s best to maintain the tightness of your trucks until you are fully confident with your balance.

Note that if you turn your penny board, you will need to shift your weight either backward on your heels or forward on your foot’s balls. If you press down on any edge of the penny board, you might end up leaning on your truck which triggers you to turn.

  • Slightly Loosen Your Trucks

By doing this, you’ll be allowed to gain better flexibility on your turns. Grab your tools and start locating the kingpin that is bigger than the nut on the truck’s center. If you want to tighten the nut, turn it to the right, to loosen it, turn the nut to the left.

Tighter trucks tend to make minimal wobble, and this can make you feel and experience more balance stability. Nevertheless, trucks are actually tight to the extent that you’ll be lifting the board for it to turn.

Since the penny boards are smaller in size, you may find this easier to loosen your truck slightly. Therefore, turning will be a lot easier. But make sure you do not make your trucks ultimately loose since this will just make it difficult to balance. In case the trucks are so loose, nuts can end up dislodged particularly if you hit some rocky terrain.

  • Gain Added through Kicking

Maintain consistent kicking until the time that you have reached enough speed prior to turning. If you are planning to go very slow, you may not reach the momentum of making turns. If you go too fast, there is also the tendency to fall. If you will move too fast, you will likely feel that your penny board will begin to wobble.

This is referred to as speed-wobbles, making it difficult to turn the board since this might be slipping out from underneath your feet. In the course of learning how to ride the penny board, you need to ensure that wider turns are maintained. Do not rush when making turns. In case you are in an open area, shift your weight gently and slowly to start your turn then move to larger arch.

  • Your Back Foot Must be Positioned Up the Lip for Sharper Turns

It’s important to position your back foot perpendicular into the board then slide this up the lip. This can be on the deck’s back to assist you in turning at sharper angles. If you turn in a sharper manner, the more that you can bend your knees to maintain the balance.

To facilitate a kick turn, make sure that the back foot is in the tail. You need to place most of your weight on your back foot. You then need to press down while the board is swing around using your front foot.

Now, place most of your weight on the front foot. This helps a lot in carving in your turn’s direction. Your foot in front will be responsible for guiding the penny board right or left in your turn.

As plastic deck tips, wheels would turn into that particular direction that you’re actually pointing the board’s deck. The process is called carving if you guide your turns with your front foot. This is actually how you typically turn your penny board. Your weight will still be shifted at your back foot also for carving. However, the front foot does the steering the most.

Learning quicker about how to penny board for all new riders does not need to be complicated. You just need to follow these steps on how to stand, kick, and maneuver the penny board.

These steps are very timely, helpful and beneficial especially to beginners and even those who have been using penny boards for quite some time now but wanted to improve their skills.

Keep in mind that having your own penny board is not the only thing you need to pay attention to. You also need to learn the right ways on how to ride a penny board.


Written by BeachAhoi

All things about beach lovers. What’s your type? Surf,Sea & Sun? Dive,Drink & Drunk? We provide tips and information to inspire you a better beach moment.

Check What is Best for U Between Penny Board vs. Nickel Board 3

Check What is Best for U Between Penny Board vs. Nickel Board

Best Longboard Surfboard Brands You Should Know 4

Best Longboard Surfboard Brands You Should Know